鋰電池檢測過程中經常遇到的問題
質量損失Mass loss

電壓降大于10%
Voltage drops more than 10% of initial
主要原因：保護板起動、連接片松動、連接線斷裂等
main cause : Protection Module tripped , Connector loosen, Nickel strip broken

溫度大于170℃ 、著火、爆炸、解體等
Extreme temperature ,catch fire ,explosion ,disassembly ,and so on
主要發生在：外短路、碰撞和強制放電
Main Tests : external short circuit, impact and forced discharge

外殼變形 enclosure deform
主要發生在：溫度循環 Main test : Thermal cycling
問題發生后，積極的采取措施
要求客戶專業技術人員到現場，確認問題點
Professional technical person of customer is required to identify the failure on the test spot

盡可能在現場給出合理的引發故障原因，也可以帶回樣品做進一步分析
Try their best to give the root cause at our center ,of course they can take the samples back for further analysis .

與生產商溝通
Communicate with manufacturers

與各地質檢和安監部門溝通
Communicate with local administrations of quality supervision, inspection and quarantine, and local administrations of work safety

提出改善方法，重新制作樣品，再送樣檢測
Give a way to improve it , remake the samples and then send for tests. 
和客戶建立良好關系
 　　和客戶交流，表達運輸安全的重要性
Often communicate with customer, Propagate the importance of transport safety .

讓客戶理解UN38.3 中各個測試的重要性
Make customer know the purpose of each test in UN38.3

提高實驗室綜合能力，成為客戶鋰電池質量保證的一部分
Improve test in our lab, Try to become a important part in lithium battery quality system of customer

和客戶技術人員交流鋰電池的危險性，讓客戶在設計時提高鋰電池的安全
communicate with technical person on danger of lithium battery, Get customer improve the quality in the stage of design .

    上一篇我們送上的文章是 NEC電池：鋰電池遇常見問題答疑 ， _!在下一篇繼續做詳細介紹，如需了解更多，請持續關注。
本文由日本NEC鋰電池中國營銷中心于2023-11-19 17:24:51 整理發布。
轉載請注明出處.